Back to overview


The item number is composed as follows: this cable will be supplied unplugged including a connector housing

This wiring harness is designed for a quick and easy connection between a display or another equipment with a connector of the HIROSE FX15 series and a graphics board. We supply a twisted pair of round cable with assembled crimp contacts and a suitable lockable connector housing. The second side is unprocessed - just cut off. Thus you will be enabled to assemble the connector according to your cable layouts to achieve an optimal function and allocation of the pairs to the signal structures. This cable is suited for samples and very small series.


  • lockable
  • samples available within 1 week
  • individual assembling possible
  • different lenghts available on short notice
  • shielded
  • with Twisted Pair
  • suitable for LVDS and DVI
  • this cable will be delivered unplugged and with enclosed connector housing


The item number is composed as follows:

KAB -> cable assembling
FX15S -> connector series
NN -> pin number, e.g. 51 pins
XXXX -> Length, e.g. 0500 = 500 mm, 0750 = 750 mm
RK -> shielded round cable, LI -> single strand unshielded

We can also offer the assembly of this wire as well as the complete, ready-to-use wiring harness. Please contact us. We would be pleased to submit you our non-binding offer.

The following socket housings can be used:

  • FX15S-21P-C
  • FX15S-31P-C
  • FX15S-41P-C
  • FX15S-51P-C


This cable is suited for the following pin headers:

  • FX15S-21S-0.5SH
  • FX15S-31S-0.5SH
  • FX15S-41S-0.5SH
  • FX15S-51S-0.5SH


The following crimp contacts can be applied:
FX15-3032-PCFA, FX15-3032-PCFB, FX15-2830PCFB

The following displays or devices will be supported:
Kyocera LED Printheads, TB-OP-LVDS, G213QAN01.0

Related products

Related products