Back to overview

CompactFlash Extender with FFC 430 mm

ADA-COMPACTFLASH-EXTENDER-0430FFC

This adapter set is designed to extend CompactFlash (CF) sockets. Simply plug in the CF card into your socket and mount the new socket within the device where needed. This is the solution to change the place of your CompactFlash (CF).

This adapter allows an easy service. Updates and Flash operations can be carried out without removing the mainboard even if the CompactFlash socket is mounted on the soldering side of a board.

This set is available in a total length of up to 500 mm. Optionally the FFC-cable can be supplied in a shielded EMC-save version.


Technical specifications:

  • dimension: 430 (l) x 59.4 (w) x 5.4 (h) (in mm)
  • operating temperature: -20 °C to 85 °C
  • weight: 61.9 g

Following length are available from stock:

  • ADA-COMPACTFLASH-EXTENDER-0100FFC
  • ADA-COMPACTFLASH-EXTENDER-0200FFC
  • ADA-COMPACTFLASH-EXTENDER-0300FFC
  • ADA-COMPACTFLASH-EXTENDER-0430FFC
  • ADA-COMPACTFLASH-EXTENDER-0500FFC


Further equipment:
ADA-COMPACTFLASH-EXTENDER-FRAME

The FFC cable extension may cause data transmission disturbances. We therefore recommend the use of CompactFlash cards with a data transfer rate of 11.1 MB/s (PIO Mode 3). The following CompactFlash cards have been tested by us: Transcend CompactFlash 133 x 2 GB & SanDisk CompactFlash 4.0 GB

We do not take any responsibility for interferences in transmission.

For CF cards from PIO 3 or DMA Mode on we recommend to use the following adapter: ADA-COMPACTFLASH-EXTENDER-0430FPC-DMA

Related products